Activating/Deactivating Demo Mode - Blaupunkt London MP48 Instrucciones De Manejo

Display
u button 4 to open the
Press the
menu.
The menu for mixing your own colour is dis-
played. "R", "G", and "B" are displayed with
the current values. The setting for "R" is
activated.
u
Press the or
edly until the desired colour value is
displayed.
u Press the or button 4 to move the
selection marker to the position after
the other colours.
u
Adjust the other colour components to
suit your preferences.
When you have fi nished making your chang-
es,
u press the ESCAPE button <.
Selecting a display illumination during a
colour scan
Press the MENU•OK button 5.
u
u
Press the or
edly until "COL SCAN" appears on the
display.
button 4 to start the
u
Press the
colour seek.
"SCANNING" is displayed. The device starts
changing the display illumination colour.
To select the currently set colour,
u press the MENU•OK button 5.
To start the seek tuning again,
u press the button 4.
If you found the desired colour,
u press the ESCAPE button <.
28
button 4 repeat-
button 4 repeat-
Activating/deactivating demo
mode
In demo mode, the functions of the device
are shown on the display as scrolling text.
The constant colour change demonstrates
the setting options of the display colours.
Pressing any button interrupts the demo
mode for a few seconds.
Switching on the demo mode
u
Switch off the device by pressing the
On/Off button 6.
u Hold the buttons 1 9 and DISP ;
pressed at the same time and switch
on the device again with the On/Off
button 6.
"DEMO" briefl y appears on the display.
Switching off the demo mode
u
Switch off the device by pressing the
On/Off button 6.
u Hold the buttons 1 9 and DISP ;
pressed at the same time and switch
on the device again with the On/Off
button 6.
The demo mode is switched off.