Equalizer Presettings (Presets); Adjusting The Display Settings; Adjusting The Display Brightness; Setting The Display Illumination Colour - Blaupunkt London MP48 Instrucciones De Manejo

Equalizer presettings
Equalizer presettings
(presets)
This device features an equalizer in which
the settings for the music genres "ROCK",
"POP" and "CLASSIC" are already pro-
grammed.
To select an equalizer setting,
u Press the AUD > button.
"BASS" appears on the display.
u
Press the or
"POP", "ROCK", "CLASSIC" or "EQ OFF"
appears on the display.
u
Press the or
one of the settings or select "EQ OFF"
to switch off the equalizer.
When you have fi nished making your chang-
es,
u press the AUD > button.
Note:
Without Equalizer presets, you can
adjust the treble and bass up to +7.
If you selected an Equalizer preset
(POP, ROCK, CLASSIC), the adjust-
ment of bass and treble is only limited.
For example, with the preset POP, the
treble adjustment is audible only up to
+3.
4 repeatedly until
button 4 to select
Adjusting the display
settings

Adjusting the display brightness

If your car sound system is installed as de-
scribed in the installation instructions and
your vehicle features the corresponding
connection, the display brightness for day
and night is switched by switching on the
vehicle lighting. The display brightness can
be adjusted separately for day and night in
increments from 1 to 9.
Press the MENU•OK button 5.
u
u
Press the or
until "DIM DAY" or "DIM NIGHT" appears
on the display.
button 4 to open the
u
Press the
menu.
u
Press the or
between the brightness levels.
When you have fi nished making your chang-
es,
u press the ESCAPE button <.
Setting the display illumination
colour
For the display illumination, you can mix a
colour from the RGB spectrum (red green
blue) or select a colour during a colour
seek.
Mixing a colour for the display
illumination
u Press the MENU•OK button 5.
u
Press the or
edly until "DISP COL" appears on the
display.
Display
button 4 repeatedly
button 4 to switch
button 4 repeat-
27