Sound; Adjusting The Bass; Adjusting The Middle; Adjusting The Treble - Blaupunkt London MP48 Instrucciones De Manejo

Sound

Sound
You can adjust the sound settings (bass,
middle and treble) separately for each
source (radio, CD, CD changer, AUX).
The settings for X-BASS and the volume dis-
tribution are used for all audio sources.
You can adjust the volume distribution set-
tings separately for telephone/navigation.
Notes:
• If you want to adjust the volume of
"Bass", "Middle" and "Treble", fi rst
select the audio source for which you
want to use the settings.
• The settings of the sound and volume
distribution for telephone/navigation
can only be adjusted during a tele-
phone call/voice output.

Adjusting the bass

You can select one of four middle frequen-
cies (60 Hz, 80 Hz, 100 Hz, 200 Hz). In ad-
dition, you can adjust the level between -7
and +7 for the selected bass frequency.
Adjusting bass frequency and level
u Press the AUD > button.
"BASS" appears on the display.
u button 4 once to reach
Press the
the BASS submenu.
or button 4 repeatedly
u
Press the
until the desired bass frequency ap-
pears on the display.
u
Press the or
the level between -7 and +7.
u Press the AUD button > twice to exit
the menu.
24
button 4 to adjust
Note:
If an Equalizer preset (POP, ROCK,
CLASSIC) is selected, the manual in-
crease of the bass level does not result
in an audible change starting at a cer-
tain setting. For further information,
please read the note in the section enti-
tled "Equalizer presettings (presets)".

Adjusting the middle

You can select one of four centre frequen-
cies (500 Hz, 1 kHz, 2 kHz, 3 kHz). In ad-
dition, you can adjust the level between -7
and +7 for the selected centre frequency.
Adjusting centre frequency and level
u Press the AUD > button.
"BASS" appears on the display.
u
Press the or
until "MIDDLE" appears on the display.
u button 4 once to reach
Press the
the MIDDLE submenu.
u or button 4 repeatedly
Press the
until the desired centre frequency ap-
pears on the display.
u
Press the or
the level between -7 and +7.
u Press the AUD button < twice to exit
the menu.

Adjusting the treble

You can select one of four treble frequen-
cies (10 kHz, 12 kHz, 15 kHz, 17 kHz). In
addition, you can adjust the level between -
7 and +7 for the selected treble frequency.
button 4 repeatedly
button 4 to adjust