Setting The Scanning Time; Confi Guring The Display; Cd Mode; Switching To Cd Mode - Blaupunkt London MP48 Instrucciones De Manejo

Radio mode

Setting the scanning time

u Press the MENU•OK button 5.
u
Press the or
edly until "SCAN TIME" appears on the
display.
u button 4 to open the
Press the
menu.
u
Set the desired scan time with the
button 4.
or
When you have fi nished making your chang-
es,
u press the ESCAPE button <.
Note:
The defi ned scanning time is also ap-
plied by the system to scanning carried
out in CD and CD-changer as well as
MP3 mode.
Confi guring the display
In radio mode, you can choose between
various display options.
• Frequency
• Memory location and time
To switch between the display options,
u press the DISP button ;.
button 4 repeat-

CD mode

You can use this device to play standard
audio CDs, CD-Rs and CD-RWs with a diam-
eter of 12 or 8 cm.
Caution!
Labelled or shaped CDs can dam-
age the CD drive.
• Do not insert any shape CDs.
• Do not attach labels to CDs since the
label may detach during operation.
Note:
Label CDs only by using a marker since
it does not contain any caustic materi-
als. Permanent markers can damage
CDs.
To ensure proper functioning, use only CDs
with the Compact-Disc logo. Copy-pro-
tected CDs can cause playback problems.
Blaupunkt cannot guarantee the proper
functioning of copy-protected CDs!
Besides being able to play audio CDs on this
device, you can also play CDs containing
MP3/WMA music fi les. For further informa-
tion, please read the chapter entitled "MP3/
WMA mode".

Switching to CD mode

If there is no CD inserted in the drive,
u button 1.
press the
The control panel opens.
u
Gently insert the CD with its printed
side uppermost into the drive until you
feel some resistance.
The drive draws in the CD automatically.
CD mode
15