Switching Off; Storing The Machine; Replacing Nylon Line - Stihl FSE 31 Manual De Instrucciones

English

Switching Off

Release the trigger switch.
N
WARNING
Note that the cutting attachment
continues to run for a short period after
you let go of the switch – flywheel effect.
During longer work breaks – disconnect
the plug from the wall outlet.
When the power tool is not in use, store
it in such a way that it does not endanger
others.
Secure it against unauthorized use.
32

Storing the Machine

For periods of 3 months or longer
Thoroughly clean the machine,
N
especially the cooling air inlets.
Take out the spool, clean it and
N
check it for damage.
The resilience and service life of the
nylon line can be increased by storing it
in a container filled with water.
Store the machine in a dry, high or
N
locked location – out of the reach of
children and other unauthorized
persons.

Replacing Nylon Line

Preparations
Switch off the trimmer.
N
Disconnect the plug from the wall
N
outlet.
Turn the trimmer on its back.
N
Removing Remaining Nylon Line
In normal operation, the supply of nylon
line in the head is used up completely.
Removing the Spool
4
3
2
1
5
Hold the housing (1) steady.
N
Press in the tabs (2) and remove the
N
cover (3).
Pull the spool (4) out of the housing.
N
FSE 31, FSE 41
2