Turning On; Use; Meaning Led Lights - PAJ GPS PET FINDER Manual De Instrucciones

2.5 Turning on

After a successful activation you can switch on the
FINDER. The on-off switch of the PET Finder is the
indentation on the front. Press this indentation for
about 2-3 seconds until you feel a resistance. As
soon as the FINDER has a GPS signal, the blue LED
flashes. To switch off the device, this button must be
pressed briefly and vigorously three times in
succession.
For the initial startup of the PET Finder uncovered
locations, such as the garden or the terrace (i. e.
not inside the home, the garage, the cellar or the
like) are recommended.

2.6 Use

Once the activation, switching on and the transfer of
a first database has been successful, you can attach
the FINDER to the collar of your pet and view the
position of the FINDER using a smartphone, tablet or
PC. Please use our app or go to the following website:
www.finder-portal.com
The portal will support you step by step in its
functions.

2.7 Meaning LED lights

S
IGNAL
The green LED is off
The green LED flashes
every 2–3 seconds
S
IGNAL
The blue LED flashes
every 2–3 seconds
The blue LED is off
The blue LED is
constantly lit
PET Finder by PAJ with Online-Tracking V.1.1 EN
© PAJ UG (haftungsbeschränkt)
16
green LED – GPRS status
M
EANING
Standby mode
GPRS signal is available
blue LED – GPS status
M
EANING
GPS reception available
standby mode
If the GPS tracker is not (no
longer) moved, the GPS
signal turns off. As soon as
the GPS tracker is moved
again, the GPS signal
automatically switches on
again.
No signal available. GPS
tracker is looking for a
signal