Inglesina otutto Manual De Instrucciones página 29

LIST OF COMPONENTS
Frame
fig. 1
T1
T2
T3 Feeding bottle holding unit
T4 Storage basket
Carrycot
fig. 2
C1
C2
Transport Seat | Car seat
fig. 3
R1 Handrail
R2 Transport seat hood
S
FRAME
ASSEMBLY/REMOVAL OF REAR WHEEL ASSEMBLY
fig. 4
fig. 5 Hook the ring (T5) on the bracket (T6); then, press the
lever (T7) until its complete hooking, making sure that the
ring (T5
CAUTION: make sure that the wheels are properly hoo-
ked before use.
fig. 6
and unhook the ring (T5) from the bracket (T6), until it is
ASSEMBLING THE FRONT WHEEL ASSEMBLY
fig. 7
WARNING: be sure that wheels are correctly linked before
use.
FRAME OPENING
fig. 8
fig. 9 Pulling the handle towards the user, the frame opens
fig. 10
the rear footboard until hearing a CLICK.
fig. 11 Make sure that all closure mechanisms are pro-
perly locked on both sides before use.
FRAME CLOSING
fig. 12 Press button (T9) and lift the handle.
fig. 13 Pulling the handle upwards the frame closes automa-
fig. 14 Be sure the lever (T8
joint.
ADJUSTMENT OF THE HANDLE
fig. 15 The frame is equipped with an adjustable unit handle.
the wished position.
BRAKES
fig. 16 To engage the brake, push downwards the lever (T11)
Always engage the brake during stops.
SWIVEL WHEELS
fig. 17 Operate both levers (T12) with the foot.
INSTRUCTIONS
STEP-SKIPPING KIT
fig. 18 Operate the rear footboard with the foot to skip small
obstacles.
STORAGE BASKET
fig. 19 Insert the basket buttonhole on the support and fas-
ten all the press studs.
CAUTION: Maximum allowed load: 3 kg.
FEEDING BOTTLE HOLDING UNIT
fig. 20 Hook the feeding bottle holding unit (T3) to the
CARRYCOT
FITTING THE CARRYCOT TO THE FRAME
fig. 21
on the frame until hearing a CLICK.
CAUTION: make sure that the carrycot is always firmly
engaged before use.
RELEASING THE CARRYCOT FROM THE FRAME
fig. 22 Act on the lever (C3
the handle.
FITTING THE HOOD
fig. 23
T7) fig. 24 Wrap the hood around the handle fastening it using
the suitable press studs.
HANDLE AND HOOD ADJUSTMENT
fig. 25 To adjust the handle and the hood act on the two la-
fig. 26
FITTING THE COVER
T8). fig. 27
INTERNAL VENTILATION
fig. 28
lever (C4).
REMOVING THE LINING
fig. 29 It is possible to remove the lining as shown in the fi-
gure.
BACKREST ADJUSTMENT
fig. 30 Operate the lever (C5) to adjust the backrest: once the
desired position is reached, set the lever to the starting posi-
tion.
SEAT UNIT
T10) till FITTING THE SEAT UNIT TO THE FRAME
fig. 31 The OTUTTO seat unit fits the frame thanks to the
frame until hearing a CLICK.
CAUTION: make sure that the seat unit is always firmly
engaged before use.
SEAT UNIT FACING THE MUM OR THE STREET
fig. 32 It is possible to use the seat unit facing the mum or
the street, and fold the frame with the seat unit fitted in.
29