Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
– Select the submenu and press
to show the parameters.
– Each parameter is shown with code, description and current setting value.
1 - Parameter code
2 - Current setting value
3 - Selected parameter
4 - Parameter description
– To modify the setting of one parameter, select it and then press
– If the Advanced level access code has not been entered, it is not be possible to enter editing page and an access denied message is be shown.
– If instead, the access rights are confirmed, then the editing screen is shown.
1 - Selected parameter
2 - New value entered
3 - Maximum possible setting
4 - Factory default setting
5 - Graph bar of the value-range
6 - Minimum possible setting
– When the editing screen is displayed, the parameter setting can be modified with ◄ and ► keys. The screen shows the new setting while a graphic bar
shows the setting range, the maximum and minimum, previous setting and factory default values.
– Pressing ◄ + L, the value is set to the minimum possible while with L + ►, it is set to the maximum.
– Pressing simultaneously ◄ + ►, the setting is restored to factory default.
– During the entry of a text string, keys L and M are used to select the alphanumeric character while ◄ and ► are used to move the cursor along the text
string. Pressing keys
and
simultaneously will move the character selection straight to letter "A".
– Press
to go back to the parameter selection. The entered value is stored.
– Press ◄ to save all the settings and to quit the setup menu. The controller executes a reset and returns to normal operation.
– If the user does not press any key for more than 2 minutes, the system leaves the setup automatically and goes back to normal viewing without saving the
changes done on parameters.
– Take into account a backup copy of the setup data (settings that can be modified using the keyboard) can be saved in the EEPROM memory of the DCRG8.
This data can be restored, when necessary, in the work memory. The data backup copy and restore commands can be found in the commands menu.
PARAMETER TABLES
– Below are listed all the programming parameters in tabular form. For each parameter, the possible setting range and factory default are indicated as well as a
brief explanation of the function of the parameter. The description of the parameter shown on the display can in some cases be different than what is given in
the table because of the reduced number of characters available. The parameter code can be used however as a reference.
Note: The parameters shown in the table with a shaded background are essential to the operation of the system thus they represent the minimum
programming required for operation.
M01 – UTILITY
P01.01
Language
P01.02
Set clock at system power on
P01.03
LCD contrast
P01.04
Display backlight high intensity
P01.05
Display backlight low intensity
P01.06
Time to switch to low backlighting
P01.07
Return to default page
P01.08
Default page
P01.09
System description
P01.01 – Select display text language.
P01.02 – Automatic clock setting activation access after power-up.
P01.03 – LCD contrast adjustment.
P01.04 – Display backlight high adjustment.
P01.05 – Display backlight low adjustment.
P01.06 – Low display backlight delay.
P01.07 – Default page display restore delay when no key pressed. If set to OFF, the display will always show the last page manually selected.
P01.08 – Default page displayed at power-up and after delay.
P01.09 – Free text with alphanumeric identifier name of specific panel/system. If a description is set here, it will be shown as title of the main page. The same
description is also used as identification for remote alarm/event reporting via SMS/email.
Setting: Parameter selection
.
Setting: Page editing
UoM
%
%
%
s
s
G
B
Default
Range
English
English
Italian
French
Spanish
Portuguese
German
Polish
Czech
Russian
Custom
OFF
OFF-ON
50
0-100
100
0-100
25
0-50
180
5-600
60
OFF / 10-600
main
(page list)
(empty)
String 20 chr.
11
Publicidad
Capítulos
Tabla de contenido
