Unit Labeling; Handling - S&P UTBS Serie Instrucciones De Uso

Ocultar thumbs Ver también para UTBS Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. UNIT laBElING

• The unit comes with a variety of labels that must not be removed. Herewith sample labels
and meaning:
ICON / laBEl

5. HaNDlING

• When unit received, unpack and make sure the packaging is intact; any defect may indicate
damage to the equipment. Review it carefully to make sure that no parts are missing.
• If there is any damage to the unit or the shipment is not complete, write down the problems
on the delivery slip and send a claim to the carrier. Also report any problems to S&P.
• The climate control unit is supplied in separate modules. Each module may be moved to its
final point of installation only in the position which will be installed, except when expressly
authorised by the manufacturer.
• Components should be transported using appropriate hoist and slings. The equipment has
corner lugs for loading and unloading.
MEaNING
Signing on fan access door. Indicates
that the equipment must be discon-
nected, followed by a waiting period,
since there are moving parts that
constitute danger to entry.
Indicates direction of airflow in the unit.
Indicates the inlet/outlet for the cold
water heat exchanger.
Indicates the inlet/outlet for the hot
water heat exchanger.
Unit identification plate. This indicates:
- Model
- Code
- Serial number
- Date of manufacture
- Output power of installed motors (Kw)
- Maximum absorbed current of motor (A)
- Power of installed electric heater
- Electrical supply
37

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Utbs-2Utbs-3Utbs-5Utbs-8

Tabla de contenido