Tdp-S Model - S&P UTBS Serie Instrucciones De Uso

CONsTaNT PrEssUrE CONTrOl
Leave one of the pressure taps
unconnected.
Important: the upper pressure tube must be connected to the "+" terminal and the lower one
to the "-" terminal. Failing this, the pressure measured will be out of range and the transmitter
screen will flash.

6.7.2.2.1 TDP-s MODEl

CONsTaNT aIrflOW CONTrOl
Connect the two taps and enter the value K shown in the
table above into the pressure transducer.
51
Air
direction