Changing The Air Filter - Omron COMP A-I-R NE-C801KD Manual De Instrucciones

NE-C801S-KDE(V)_main.book Page 20 Friday, December 14, 2018 10:32 AM

7. Changing the air filter

If the air filter has been used for more than 60 days, replace it with a new one.
1.
Pull the air filter cover off
the compressor.
2.
Change the air filter.
3.
Put the air filter cover
back in place.
Make sure it is attached
properly.
Notes:
• Use only OMRON air filters designed for this device. Do not operate without a filter.
• There is no front or back orientation for the air filters.
• Check that air filters are clean and free of dust before inserting them.
• Do not wash or clean the filter. If the air filter becomes wet, replace it. Damp air filters can
cause blockages.
• Please contact your OMRON dealer for additional air filters, or if the parts supplied with the
device are damaged or missing.
20