11. Wear close-fitting clothing.
•
Do not wear ties, garments with open sleeves, loose garments, accessories such as neck-
laces, etc., which could get caught in rotating parts.
•
When working outside it is recommended to use rubber gloves and shoes with studs. Slip-
pery gloves and footwear can lead to injuries.
•
Cover long hair with a cap or net to prevent it from becoming caught in rotating parts.
•
Wear a safety helmet, safety footwear, etc. in accordance with the working environment.
12. Do not work in an unnatural posture.
•
Keep a firm footing and balance to avoid falling and injury.
13. Remove tools such as spanners.
•
Before putting the switch to the ON position, check that the inspection and adjustment tools
have been removed.
•
The operation of the machine whilst tools are inside could cause accidents and injury.
14. Operate the machine with extreme care.
•
Always work by paying great attention to the handling of the machine, the working methods
and the surrounding conditions. Carelessness could result in accidents and injury.
•
Do not work with the machine if you have low concentration levels such as when you are
tired, after consuming alcohol, whilst ill, under the effects of medication, etc.
15. Do not handle the power supply cable inappropriately.
•
Do not carry the product by the cable or pull on the cable to disconnect it.
•
Do not place the cable close to hot objects, grease and oils, scissors or sharp objects.
•
Do not stand on the cable, pull it or apply excessive force which could damage it. This could
cause an electric shock or short-circuit leading to fires.
16. Carry out maintenance on a daily basis.
•
Follow the instruction manual when changing accessories and parts.
•
Periodically inspect the power supply cable and plug. If damaged, call the distributor or the
sales division for repair.
•
It you use an extension cable inspect it periodically and change if damaged.
•
If you use extension cables outside, use those intended for outdoor use to avoid electric
shocks, short-circuits or fire.
•
Keep parts used for gripping dry and clean and free from oil and grease. If they are slippery
injury could result.
17. Check that there are no damaged parts.
•
Before using the machine, carefully check for damage to the protection parts and other parts
and check normal operation of the machine and its functions.
•
Check that there are no anomalies in the adjustment of movable parts, tightening, damaged
parts and other parts which affect operation.
•
Do not use the machine if the start and stop switches do not work.
•
Follow the instruction manual for the replacement or repair of guards and other parts. If you
cannot find instructions in the instruction manual call the distributor or our sales division for
the repair.
18. Store the machine properly when not in use.
•
Store it in a dry place out of the reach of children and locked with a key.
19. For general maintenance and repairs call an authorised distributor.
•
Our product complies with the relevant safety standards. Do not remodel the machine.
•
Bear in mind that for any repair you must contact the distributor or our sales division. If re-
pairs are carried out by unqualified or unskilled personnel, the operation of the machine will
be compromised which could lead to accidents or injury.
20. The machine must always be moved by two people.
21. Always work with sufficient light.
ENGLISH
17