Safety Notes; Safety Instructions - Rothenberger ROGROOVER 1 - 12 Instrucciones De Uso

1

Safety Notes

1.1

Safety instructions

1. Use the correct voltage.
• Use the voltage indicated on the equipment nameplate or in the manual. If the supply volt-
age is different from the voltage indicated overheating, smoke or fire could result.
2. Verify that the switch is in the OFF position before inserting the plug in the electric power sup-
ply socket.
• If the plug is inserted in the power supply socket in the ON position the machine could start
up unexpectedly and cause an accident. Ensure that the switch is in the OFF position.
3. Avoid electric shocks.
• Do not touch the plug with wet hands.
• Do not use the machine in the rain or in areas where the machine could get wet.
• Earth the machine to avoid electric shocks.
4. Take into account the conditions in the workplace.
• Do not use the machine in the rain, in wet areas or in areas where the machine could get
wet easily. Moisture could impair the motor insulation and result in electric shocks.
• Do not use the machine near liquids or flammable gases such as petrol and solvents. Fire or
explosions could result.
5. Use the specified accessories and attachments.
• Do not use accessories or attachments other than those specified in the instruction manual
or in our catalogues. Accidents or injuries could result.
6. Turn the main unit to the OFF position and disconnect the plug from the power supply socket
in the following cases.
• When the machine is not being used or when parts are being changed, repaired, cleaned or
inspected.
• When the accessories are being changed.
• When swarf or other foreign bodies are being removed.
• When connecting the plug, the main unit could start up unexpectedly and cause an accident.
7. If any anomaly is detected stop the machine immediately.
• When the machine does not operate smoothly or if any anomalies such as odours, vibra-
tions or unusual noises are detected stop the machine immediately.
• Check the symptoms for each item in the section entitled, "Possible causes of malfunctions"
at the end of this manual and follow the relevant instructions. Continued use of the machine
can lead to overheating, smoke or fire which could cause accidents or injury.
• If overheating occurs, or if smoke is produced by the machine, do not try to repair the ma-
chine yourself and request inspection and repair.
8. Keep the workplace clean.
• Ensure that the work table and the workplace are in good condition and well lit.
• An untidy workplace and work table can cause accidents.
9. Do not allow unauthorised personnel near the machine.
• Do not allow the main unit or the power supply cable to be touched and do not allow unau-
thorised personnel to operate the machine.
• Do not allow unauthorised personnel to enter the workplace, especially children. Injuries
could occur.
10. Do not use the machine with force.
• Only use the machine for the designated purpose. Work according to the capacity of the
main unit in order to guarantee safe and efficient operation. Excessive force could not only
damage the product but also cause accidents.
• Do not use the machine in any way that could cause the motor to lock or cause smoke or
fire.
16 ENGLISH