Virutex CE23N Manual De Instrucciones página 5

E N G L I S H
CE23N ABRASIVE PLANER
(See figures in pages 21, 22)
1. SAFETY INSTRUCTIONS
FOR HANDLING THE PLANER
Before using the machine, carefully
read the GENERAL SAFETY INSTRUC-
TIONS LEAFLET enclosed with the
machine documentation.
1. Before plugging in the machine, ensure that the
power supply voltage corresponds to what is stated
on the machine's characteristics plate.
2. Before starting up the machine, ensure that the
abrasive roller is properly fastened in place and does
not rub against any other part of the machine.
3. Before starting to work, make sure that there are
no nails or sharp angles on the surface to be sanded
that could damage the abrasive roller.
4. Always keep hands clear of the sanding area and
grasp the machine by the handgrip.
5. The dust produced during sanding may prove to
be toxic or harmful to your health, and therefore it
is necessary that the machine always be connected
to a dust collector.
6. It is also recommended that dust collection be used
in order to prolong the life of the abrasive roller.
7. Wait until the machine has come to a complete
stop before putting it down or storing it.
8. Unplug the machine from the electrical outlet
before performing any maintenance operations.
9. Wear earplugs when using the machine (see
chapter 13)
10. Always use original VIRUTEX spare parts.
2. SPECIFICATIONS
Voltage.......................................................230 V
Input power................................................700 W
Motor.....................................................50/60Hz
No-load speed (rpm).................................16,500
Sanding width...........................................81 mm
Max. sanding depth.....................................1 mm
Weight......................................................3,2 Kg
Weighted equivalent continuous
acoustic pressure level A.......................................88 dBA
Acoustic power level A............................................99 dBA
Uncertainty............................................................K = 3 dbA
Wear ear protection!
Vibration total values........................................a
Uncertainty...........................................................K: 1.5 m/s
3. STANDARD EQUIPMENT
Inside the box you willfind the following components:
1. CE23N abrasive planer fitted with 50-grain
abrasive roller.
2. Lateral fence
3. 3-mm Allen key
4. Dust collector nozzle
5. Instructions manual
4. TOOLS
CODE DESCRIPTION
2345510 40-grain Carborundum abrasive roller
2345511 50-grain Carborundum abrasive roller
2345512 60-grain Carborundum abrasive roller
2345514 60-grain zirconium oxide abrasive roller
5. OPTIONAL ACCESSORIES
6446073 Dust collector attachment
6. GENERAL DESCRIPTION
AND APPLICATIONS
The CE23N abrasive planer is a tool that will prove
useful to carpenters, fitters, restorers and shipwrights.
It is especially designed for the shaving and/or sanding
of: wood, varnished wood, stratified wood, softwood
and such materials as fibreglass and carbon fibre
reinforced with epoxy, vinyl and polyester resins.
To enhance the machine performance and working life
of the abrasive roller, we recommend the following:
- set the pass depth according to the hardness of
the material to be sanded, so that the machine may
be moved at a reasonable speed, thus preventing
overheating due to excessive loss of roller speed.
- change the abrasive roller once worn; a worn roller
does not sand effectively and causes the motor and
the roller itself to overheat.
The machine is equipped with a dust collector con-
nection which can be used for connection to our
AS182K, AS282K dust collector or any industrial
equivalent via the STANDARD DUST COLLECTOR
ATTACHMENT (ref. 6446073). For assembling the dust
collector connection, remove the chips outlet guide
A (Fig. 1) using screws B and fit the dust collector
: <2.5 m/s
2
h
2
5