ECOVACS ROBOTICS DEEBOT OZMO 610 Manual De Instrucciones página 14

3. Operating and Programming
1 Docking Station Placement
Place the Docking Station on a level
floor surface against the wall with the
base perpendicular to the ground. Keep
the immediate area 1.5m (5') in front
of the charger and 0.5m (1.6') on both
sides of the charger clear of objects and
reflective surfaces.
Plug the Docking Station in.
Install Side Brushes
2
Attach Side Brushes to the bottom of
DEEBOT by pressing a brush into each
slot with the matching color until it clicks.
Power ON
3
Open the robot's Top Cover. Turn the
robot's Power Switch to the ON position.
"I"=Power ON; "O"=power OFF. DEEBOT
is powered ON when DEEBOT emits a
musical sound and the AUTO Mode Button
stays illuminated.
* When DEEBOT is not cleaning, it is suggested to keep it powered ON and charging instead of
powered OFF.
12
FR-CA EN
ON