Tornado P Serie Manual De Uso Y Mantenimiento página 3

Your new Floor Machine will afford you many years of trouble-free operating satisfaction provided it is given proper care.
Prior to packaging, your Floor Machine was inspected by a Quality Control Technician.
UNCRATING
Your Floor Machine was protectively packed to prevent damage
in shipment. We suggest that upon removing the unit from its car-
ton, you carefully inspect it for any possible damage in transit. If
damage is discovered, immediately notify the transportation com-
pany who delivered your machine. As a manufacturer, we are
unable to act upon any claim for concealed damage; you must
originate the claim.
IMPORTANT SAFEGUARDS
This machine is designed to be safe when used to perform the
functions specified in this Operator's Manual. Should damage
occur to electrical or mechanical parts, the machine should be
repaired by the manufacturer or competent service station before
using in order to avoid further damage to the machine or physi-
cal injury to user. Your floor machine is equipped with a safety
switch lockout device designed for your safety. Do not attempt to
bypass or defeat the safety lockout device. Never use any device
to lock the power switch triggers in the ON position.
WARNINGS
READ THIS OPERATOR'S MANUAL!
WARNING: You must have training in the operation of this
machine before using it.
WARNING: Machines can burn flammable materials and vapors.
Do not use this machine with or near fuels, grain dust, solvents,
thinners or other flammable materials.
WARNING: Do not operate this machine unless it is completely
assembled.
WARNING: Do not use this machine as a step or to move furni-
ture.
WARNING: When disconnecting power cord from electrical out-
let, grasp the plug. Pulling it out by the cord itself can damage
cord insulation and internal connection to plug. To prevent elec-
tric shock, always remove the electrical plug from the electrical
outlet before doing any repairs or maintenance to this machine.
WARNING: To prevent injury, always remove the electrical plug
from the electrical outlet before changing the polishing pad and
before leaving the machine.
WARNING: To prevent injury, keep hands, feet and loose cloth-
ing away from the rotating pad.
WARNING: Maintenance and repairs must be done by autho-
rized personnel only.
WARNING: Keep all fasteners tight. Keep adjustments according
to specifications.
WARNING: Keep the electrical parts of the machine dry. For
storage, keep the machine in a building.
WARNING: Always use a three-wire electrical system connected
to the electrical ground. For maximum protection against electric
shock, use a circuit that is protected by a ground fault circuit
interrupter. Consult with your electrical contractor.
WARNING: To prevent damage to the power cord, do not let
the pad, pad driver or wheels touch the power cord when the
machine is running. Always lift the power cord over the machine.
WARNING: Make sure all labels, decals, warning, cautions and
instructions are fastened to the machine.
APPLICATIONS FOR FLOOR MACHINE
175 RPM
The 175 RPM floor machine will operate in a wide variety of
applications. and can be used for spray buffing, dry buffing,
scrubbing and stripping applications. These heavy duty floor
machines are specially recommended for long term aggressive
scrubbing and stripping maintenance. The heavy duty floor
machines are specially recommended for the following applica-
tions:
• Scraping with an attachment tool to remove heavy industrial
deposits and residue or to prepare a foundation for installation
of carpet.
• Wire brushing of concrete floors.
• Sanding with very aggressive sandpaper or sand
screen discs.
• Carpet restoration where shampooing & pile lifting require very
stiff brush bristles. The 175 RPM floor machine is the most
versatile speed in the floor care industry.
APPLICATIONS OF 175 RPM STANDARD
SPEED FLOOR MACHINES ON HARD
FLOORS
• Spray buffing with red spray buff pad and spray buff chemical.
• Dry buffing a buffable finish with a tan, beige or white pad or
brush.
• Scrubbing with green or blue pad or scrubbing brush.
• Stripping with a black pad and a stripping chemical.
APPLICATIONS OF 175 RPM STANDARD
SPEED FLOOR MACHINES ON CARPET
• Bonnet cleaning with a yarn bonnet and carpet
maintainer chemical.
• Shampooing using a showerfeed shampoo brush and solution
tank mounted to the handle tube containing carpet shampoo.
WARNING
To prevent injury, always remove the electrical plug from the
electrical outlet before changing the polishing pad and before
leaving the machine.
3