Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

cable (2) and replace the printer access cover
(3).
Install the Optional Finisher
1. Make sure the printer is turned off.
2. Unpack the finisher's horizontal transport unit
and position it on top of the printer.
3. Insert the two mounting screws to secure the
horizontal transport unit.
4. If the duplexer is installed, the guides from
the printer itself must be moved to the
duplexer exit module.
The guides are two pieces of rubber and plastic
that assist in stacking to the top of the printer.
When installing the horizontal transport this
guide needs to be moved from the body of the
printer up to the exit module.
5. Place the mounting bracket in position and
insert the two mounting screws to secure it.
6. .Remove all the packing materials from the

finisher.

7. Slide the finisher into position engaging the
latching hardware.
8

Publicidad

Tabla de contenido
loading

Tabla de contenido