Content [Original Ver-
sion: German]
1.
2.
3.
Use ...................................... 222
4.
5.
6.
7.
8.
9.
Read first!
Read these operating instructions
thoroughly and carefully before
using. Always observe safety pre-
cautions and hazard warnings!
Always keep these operating
instructions with the product or
somewhere accessible at any time
to anyone.
1. General Information
These operating instructions con-
tain important information on how
to use the SATA dry jet 2, referred
to herein as a dry jet blow gun.
These instructions also provide
information on operation, care,
maintenance, cleaning and trouble-
shooting.
SATA dry jet 2 Operating Instructions
1.1. Target group
These operating instructions are
intended for
■ Skilled personnel in the painting
trade.
■ Personnel trained to perform
painting work in industrial and
trade shops.
1.2. Accident prevention
Always observe general as well as
specific national accident preven-
tion regulations and corresponding
workplace and plant safety instruc-
tions.
1.3. Replacement parts, ac-
cessories and parts subject
to wear
Always use only original SATA
replacement parts, accessories and
wearing parts. Accessories not sup-
plied by SATA are not certified and
are not approved for use. SATA is
not responsible for any damage re-
sulting from the use of unauthorized
replacement parts, accessories and
wearing parts.
1.4. Warranty and
liability
The SATA General Conditions of
Sale and Delivery and further con-
tractual agreements, if applicable,
as well as currently valid laws ap-
ply.
SATA cannot assume any liability
for the following:
■ Failure to observe the operating
instructions.
US
221