Makita LS1013 Manual De Instrucciones página 15

ENGLISH
1 Stopper pin
2 Bolt
3 Blade guard
4 Knob
5 Kerf board
6 Saw blade
7 Blade teeth
8 Left bevel cut
9 Straight cut
10 Right bevel cut
11 Adjusting bolt
12 Turn base
13 Top surface of turn base
14 Periphery of blade
15 Guide fence
16 Adjusting screw
17 Stopper arm
18 Lock lever
19 Grip
20 Pointer
21 Miter scale
22 Lever
23 Arm
24 Bevel scale
25 Lock-off button
26 Switch trigger
27 Handle
28 Switch for laser
29 Socket wrench
30 Wrench holder
31 Center cover
32 Hex bolt
33 Blade case
SPECIFICATIONS
Model
Blade diameter ......................................................................................................................................... 250 – 260 mm
Hole diameter
For all countries other than European countries ............................................................................. 25 mm and 25.4 mm
For European countries ........................................................................................................................................ 30 mm
Max. cutting capacities (H x W) with blade 260 mm in diameter
Miter angle
0°
45°
52° (right)
–1
No load speed (min ) ............................................................................................................................................ 3,700
Laser Type (LS1013L/LS1013FL only) ..........................................................Red Laser 650 nm, <1mW (Laser Class 2)
Dimensions (L x W x H)
LS1013/LS1013F.............................................................................................................715 mm x 520 mm x 625 mm
LS1013L/LS1013FL.........................................................................................................715 mm x 520 mm x 640 mm
Net weight ................................................. LS1013: 22.4 kg, LS1013F: 22.6 kg, LS1013L: 23.2 kg, LS1013FL: 23.4 kg
Safety class .............................................................................................................................................................
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Explanation of general view
34 Arrow
35 Shaft lock
36 Inner flange
37 Spindle
38 Ring
39 Outer flange
40 Hex bolt (left handed)
41 Dust nozzle
42 Dust bag
43 Fastener
44 Support
45 Turn base
46 Sub-fence
47 Sub-fence R
48 Screws
49 Vise arm
50 Vise rod
51 Screw
52 Vise knob
53 Guide fence
54 Vise plate
55 Vise nut
56 Holder
57 Knob
58 Vise
59 Spacer block
60 Aluminum extrusion
61 Spacer blocks
62 Horizontal vise
(optional accessory)
63 Cut grooves with blade
64 Hex bolts
65 Triangular rule
45° (left)
50 mm x 310 mm
(left) 50 mm x 200 mm
(right) 50 mm x 220 mm
—
66 Screw
67 Miter scale
68 Pointer
69 Bevel scale
70 Pointers
71 Arm holder
72 Right 45° bevel angle
adjusting bolt
73 Left 45° bevel angle
adjusting bolt
74 Hex lock nut
75 Kerf block
76 Work piece
77 Cutting line
78 Vertical vise
79 Screwdriver
80 Screw (one piece only)
81 Lens for the laser light
82 Limit mark
83 Brush holder cap
84 Light
85 Light switch
86 Pull out
87 Push
88 Lamp box
89 Screws
90 Fluorescent tube
91 Dust box
92 Cover
93 Button
94 Cylinder part
95 Sawdust
LS1013/LS1013F/LS1013L/LS1013FL
Bevel angle
0°
91 mm x 310 mm
91 mm x 220 mm
91 mm x 190 mm
45° (right)
31 mm x 310 mm
31 mm x 220 mm
—
/II
15