Wax Ring Installation; Toilet Placement - Jacuzzi Perfecta Instrucciones De Instalación Y De Funcionamiento

Wax Ring Installation

Prior to wax ring placement, measure from the
floor to the flange. If you have tile over and existing
wood or concrete surface, a thicker wax ring will be
needed if the distance is greater than 1¼".
X
X
Turn the bowl upside down, exposing the underside
of the unit, and place on a soft surface.
Two people may be needed to perform Step 1.
When placing the wax ring over the toilet outlet, the
tapered flange must be facing up (Figure 3). This
tapered flange will rest in the opening in the floor.
X
Y
Place the wax ring over the toilet outlet opening
(Figure 3).
X
Z
Place a piece of wax paper over the wax ring and
press the wax ring firmly into place (Figure 4).
When complete, proceed to the "Toilet Placement"
section.

Toilet Placement

The following steps will require two people.
X
X
One person should lower the toilet down, while the
second person should guide the tapered flange into
the floor flange opening (Figure 5).
X
Y
After the toilet has been lowered down and is
resting on the mounting surface, press down firmly
on the toilet to ensure proper gasket seal.
When complete, proceed to the "Securing the Toilet"
section.
Page 6
www.jacuzzi.com
Universal 2-Piece Toilet Series
Wax Ring
Bowl Outlet
Bowl
Soft Surface
Figure 3
Wax Paper
Figure 4
Bowl
Mounting Tab
Floor Flange
Figure 5
Installation and Operation