Function Introduction - Pioneer VREC-200CH Manual Del Usuario

5. OK Button/video recording button/photographing button/playback button
Function 1: OK Button
Under the status of standby video recording mode/Photographing
mode/Playback Mode; enter the menu mode, shortly press the [Up
Button/Down Button] to browse, shortly press the [OK Button] to confirm.
Function 2: start-up/turn-off of video recording function
Under the video recording mode, shortly press the [OK Button] to start the video
recording, shortly press the [OK Button] again to stop the video recording.
Function 3: Photographing Button
Under the Photographing Mode, shortly press the [OK Button] to shoot a
picture.
Function 4: Document play button
Under the document browse mode, shortly press the [OK Button] to play the
video, and shortly press the [OK Button] again to pause.

Function Introduction

1. Use the automatic recording function
Start up the automobile engine, the car black box will automatically start up and
turn on the video recording function, and the charging indicator will be
lightened. Turn off the automobile engine, the car black box will automatically
save the recording content and power off. The recorded image will be saved on
the TF card by segment, and when the TF card is fully occupied the car black box
will cover the earlier recorded image. The recording time segment can be set in
the menu by you, and the range includes 3 levels including 1 min/2 min/3 min.
[Note]
a. If you select any level among the "1/2/3" min levels, after the TF card is fully
occupied the car black box will cover the earlier recorded image;
b. Video recording documents and photographing documents of the front and
back cameras will be respectively saved in the "DCIMA file" and "DCIMB file"
15 / 24