Pioneer VREC-200CH Manual Del Usuario página 19

10. Parking monitoring
It will record 30 seconds and power off under the flameout status. It will
automatically enter the normal cycle video recording after 15 seconds' locking
video recording under status other than flameout. When the Parking Monitoring
Function is in operation, under the shutdown status, if the vehicle is slightly
shaken, the car black video will automatically turn on for video recording and
locking; if it is under the flameout status, the video recording duration will be 15
seconds before power off. There will be locking video recording Other than
flameout.
[Note] This function needs hardware support.
11. Motion Detection
Enter the menu under the video recording mode, start up the Motion Detection
Function, when the image is detected to be changed, the automatic video
recording will save 10 seconds' video.
12. Visual back off
Firstly, connect the car black box to the Vehicle Charger power source, plug the
Post-tensioning Camera into the AV-IN slot, and connect the black and red wires on the
Stay Wire Camera to the backup light. Plug in the Vehicle Charger, and the device will
automatically start the video recording status, and it will display the backup image
when backing up. When the Visual Back Off is turned off, the device will automatically
return the video recording mode.
Product Feature
- Outstanding design with an elegant metal shell.
- High resolution wide-angle lens, more convenient for the high resolution video
recording at all occasions and easy to carry.
- Sensitization device specially developed for the car black box, can capture more clear
picture at dark occasions
18 / 24