Opening / Closing Door; Activation After Selecting The Programme; Reset Programmsetting; Quick Start - CASO DESIGN IMG25 P Manual Del Usuario

12.4 Opening / closing door

 Open door
Open the door of the device. If the device is switched on, the current cooking programme will
be interrupted.
► Leave the door open for a moment before reaching into the cooking chamber, to allow the
accumulated heat to escape.
 Close doors
Close the door until the door latch audibly locks in place. If a current cooking programme
was interrupted as a result of opening the door, the current cooking programme will be
continued after pressing the button

12.5 Activation after selecting the programme

After selecting the program, press the button

12.6 Reset programmsetting

If needed , press

12.7 Quick start

Utilise this function to programme the oven for comfortable cooking at 100% microwave
performance.
Press the Start/Quickstart button in quick sequence to set the cooking time (max 10
minutes). The oven starts automatically after 2 seconds.

12.8 Pause/Cancel

In order to interrupt an ongoing cooking programme, you can proceed as follows:
Press the button once. The cooking programme that is in use will be stopped.
Or:
Open the door of the device. The cooking programme that is in use will be stopped.
► To continue the interrupted cooking program, press the button
To terminate the interrupted program, press the button
Please note
.
once to reset the settings of the device.
Please note
to start the preset cooking programme.
a second time.
after closing the door.
55