Opening / Closing Door; Activation After Selecting The Programme; Reset Programmsetting - CASO DESIGN IMCG25 Instrucciones De Funcionamiento Originales

► For microwave cooking, do not use any products made from recycled paper, as they
could contain tiny metal fragments, which could cause sparks and/or result in fire.
► Do not use any aluminium foil when using the microwave or combinations with the
microwave (see following table).
The following table is intended as a basis for selecting the correct cookware:
Cookware
Heat-resistant glass dishes
Non heat-resistant glass dishes
Heat-resistant ceramic dishes
Microwave-resistant plastic container
Kitchen roll
Metal sheet
Metal rack
Metal container
Aluminium foil and container

14.4 Opening / closing door

 Open door
Open the door of the device. If the device is switched on, the current cooking programme
will be interrupted.
► Leave the door open for a moment before reaching into the cooking chamber, to allow
the accumulated heat to escape.
 Close doors
Close the door until the door latch audibly locks in place. If a current cooking programme
was interrupted as a result of opening the door, the current cooking programme will be
continued after pressing the button Start/Quick Start.

14.5 Activation after selecting the programme

After selecting the program, press the button Start/Quick Start to start the preset cooking
programme.

14.6 Reset programmsetting

If needed , press
Micro-wave









Please note
once to reset the settings of the device.
Grill Convection
 
 
 
 
 
 
 
 
 
Combination









68