Maintenance And Cleaning - S&P TURBO - 451 CN Manual De Uso Y Mantenimiento

MAINTENANCE AND CLEANING

- Ensure that the device is disconnected from the electrical grid before carrying out any maintenance
and/or operation work.
- Never use petrol or aggressive and/or abrasive dissolvents to clean the device, using instead a cloth
dampened with water.
- In order to access the blade of the device, remove the fixing ring from the front protection grille (Fig. 4),
bearing in mind that a screwdriver is required to remove the safety screw.
- Once the cleaning operation is complete, remember to return the protection grille fixing ring using the
safety screw, in order to avoid accidents.
PUTTING OUT OF SERVICE AND RECYCLING
- Should it be put out of service, even if only temporarily, we recommend keeping the device in a dry place,
free from dust, within its original packaging.
- EEC legislation and our undertaking with future generations mean we should always recycle materials;
please do not forget to deposit all excess packaging elements in the corresponding recycling bins, and
take the replaced devices to the nearest Waste Management Plant.
THE MANUFACTURER SHALL NOT BE LIABLE FOR ANY DAMAGE TO PERSONS AND OBJECTS
DERIVING FROM BREACH OF THESE WARNINGS.
14