Changing The Water Filter - Samsung RF4267HA Manual Del Usuario

If you don't want to make more ice, touch
( 9 ) Ice Off
this button.
The icon will light up and the Ice-Maker
stops making ice.
We recommend you stop ice
making if the following occur:
- There is enough ice in the ice
bucket.
- You want to save water and
energy.
- Water is not being supplied
to the refrigerator.
If the ice maker function is ON, and
the water Line is not connected,
there will be a water valve noise
from the back of the unit, press the
Ice Off (Hold 3sec for child lock)
button for less than 3 seconds until
the Indicator (
If you do not touch any button, the freezer and fridge
temperature indicator turn off in a few seconds.
If you touch any button, the display lights up again.
Water filter usage
( 10 ) Filter
This icon will light up when you need to
change the filter.
After you use about 300 gallons of water,
the filter indicator lights up. (about 6 months).
After you install the new water filter, reset the
filter indicator by touching the Alarm/hold 3
sec for Filter Reset button.
• If water is not dispensing or
dispensing slowly, you need
to replace the water filter
because the water filter is
clogged.
• Some areas have large
amounts of lime in their water,
which causes the water filter
to clog more quickly.

cHANGING THE WATER FILTER

To reduce risk of water damage to your
property, DO NOT use generic brands of
WARNING
water filters in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTER.
SAMSUNG will not be legally responsible for any
damage, including, but not limited to property
damage caused by water leakage from use of a
generic water filter. SAMSUNG Refrigerators are
designed to work ONLY WITH SAMSUNG Water
Filter.
The Filter light turns red to let you know when it is
time to change your water filter cartridge.
To give you time to get a new filter, the red
light comes on just before the capacity of
the current filter runs out.
Changing the filter on time provides
you with the freshest, cleanest water from your
refrigerator.
1. Shut off the water supply. Then, turn the water
filter ( 1 ) about 1/4 turn, counter-clockwise.
2. Pull the water filter ( 1 ) from the case filter ( 2 ).
) illuminates.
• Sometimes, it is hard to disassemble the water
filter because impurities in the water cause it to
stick. If you are having difficulties, grip the water
filter firmly and pull it hard.
This is normal. To minimize the water leaks, keep the
filter cartridge horizontal
when you pull it.
• To prevent overflow,
empty the water filter
tray ( 3 ) and dry around
the filter case ( 2 ).
3. Insert the new filter into the filter case ( 4 ).
4. Push the filter, and then turn it clockwise until it
locks.
• The locked symbol should be lined up with the
indicator line.
• To change the water filter more easily, shut
off the water supply valve.
• When you pull the water filter, a little water
can leak from the opening.
• If you have trouble inserting the water filter
because of high water pressure, shut off
the water supply valve.
4
(Red)
2
1
2
3
operating _13