Date And Time Setting; Video Mode; Photo Mode - Midland H9 Manual De Usuario

DATE AND TIME SETTING

Date and time are automatically set when H9 is conncected to the APP MIDLAND H9 or it
is possible to set them manually through the Settings menu.
Should the battery be removed from the camera, date and time have to be set again.

VIDEO MODE

Video
To record video verify the camera is in Video mode. If the Video icon is not displayed on your
camera's LCD screen, press the Power/mode button repeatedly until it appears.
To start recording:
Press the Shutter/Select button. The camera will emit one beep and its Status Light (Blue
Led) will flash while recording.
To stop recording:
Press the Shutter/Select button. The Camera Status Light will stop flashing and H9 will emit
one beep to indicate recording has stopped.
This camera automatically stops recording when the battery is out of power. Your videos will be
saved before the camera powers OFF.

PHOTO MODE

Photo
To capture a photo, verify the camera is in Photo mode. If the Photo icon is displayed on the
LCD screen, press the Power/mode button repeatedly until it appears.
To take a photo press the Shutter/Select button.
H9 will emit the shutter sound.
BURST PHOTO MODE
Burst
To capture a Burst Photo series, verify the camera is in Burst Photo mode. If the Burst Photo
icon is not shown on the camera LCD screen, press the Power/mode button repeatedly until it
appears.
To take a Burst Photo series:
press the Shutter/Select button. The camera will emit the camera shutter sound.
17