dirna Bergstrom bycool green line COMPACT 3.0 MAN TGX Instrucciones De Montaje página 21

COMPACT 3.0
5a In the case of XLX cabin with spoiler TGX model
only, attach EPDM 30x25 seal on the opposite
side to the other models, as indicated.
Leave the boreholes
6 Position the equipment on the hatch plate,
introducing studs in the slider boreholes of the
plate.
Caution! When positioning the unit above
the hatch gap, check that the wastewater
run-offs are not blocked by the EPDM
seal.
6
free
Air conditioning for vehicles
5a
Positioning the rear part of the unit
575
245
6
21
position on the edge
EN
575
245