COMPACT 3.0
9
Via the interior section, laterally align the
equipment in the hatch.
! Important: If the seal (A) is not attached
to the base, remove the protective paper
and attach as indicated.
A
10
Attach the channelling equipment on the front.
! Important: Any chanelling equipment (B)
included should be discarded as it is not
valid for this unit.
B
11
Connect (2) communication cables A, the (2)
4-way and (4) 2-way boxes, on the front, with
those of the Compact.
Bear in mind that the two-way box marked with
white cables is joined to the connector with
white cables that comes out of the central part
of the equipment.
Air conditioning for vehicles
9
10
Area to apply
adhesive
11
2 ways
A
23
A
4 ways
EN
=
=
A
2 ways