Steam Ironing - T-Fal 1647 Instrucciones De Uso Y Mantenimiento

4 - SELECTION OF IRONING TEMPERATURES (according to model)
The ironing temperature is adjusted using the thermostat knob (F) or the cursor. The thermostat
lamp lights up (G) when the iron is heating and goes off when it reaches the chosen temperature.
Hints
We recommend that you iron
fabrics according to the order
specified on the iron, in order to
obtain increasing tempera-
tures: synthetics, silk ( ), wool
( ), cotton, linen (
Wait for a few moments after
reducing the temperature, in order to avoid scorching fragile fabrics with an excessively hot soleplate.
With mixed fiber fabrics, we recommend that you set the thermostat according to the fabric to be
ironed at the lowest temperature (e.g. for linen and viscose, choose viscose and set the thermostat to
"synthetic" ).
TEXTILE
SYNTHETICS
Acetate (Rhodia)
Acrylic (Crylor, Dralon,
Orlon, Courtelle...)
Polyamide (Nylon, Rilsan...)
Polyester (Tergal, Dacron,
Terital, Trevira...)
Viscose (Rayonne, Fibrane)
SILK
WOOL
COTTON/LINEN
= Steam zone
Only use steam when the thermostat is set facing the colored zone.

5 - STEAM IRONING

Set the steam adjustment control (C) to between 2 and 8, depending on the required level of steam :
Min : 2, max : 8.
7
4
)...
8
5
THERMOSTAT CURSOR POSITION
Important: Before using the iron for the first time
with a steam setting, we recommend that you ope-
rate it for a few moments horizontally, away from
your laundry. In the same conditions, activate the
boost of steam (A) several times before each iro-
ning session.
•
••
•••
6