Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Fixing the Frame
Should it be necessary to adjust the height of the frame,
proceed as follows:
• Unfasten the two screws fixing the upper chimney,
and remove it from the frame (from the upper part).
• Unfasten the metric screws joining the two columns,
at the sides of the frame;
• Adjust the frame to the height required, then replace
the screws removed as described above;
• Insert the upper chimney from above and leave it free
on the frame;
• Lift the frame, insert the slots onto the screws and
slide them until they lock;
• Tighten the two screws and insert the other two
screws provided.
Before final locking of the screws it is possible to make
small adjustments to the frame, making sure that the
screws do not come out of the adjustment slot.
• The Frame must be securely fastened both due to the
weight of the Hood and the stress caused by occa-
sional sideways pressure on the Appliance when in
position. When fastened, check that the base is stable
even when the Frame is subjected to bending.
• In all cases where the Ceiling is not sufficiently
strong at the point of suspension, the Installation
technician must strengthen it with suitable plates and
counterplates, anchored to structurally sound ele-
ments.
EN
1
2
1
2
7 7
Publicidad
Tabla de contenido
