Wall Mounting The Speaker For Bcs-Sb626 - Pioneer BCS-727 Manual De Instrucciones

3. Connect the wires to the player.
Insert the cables connected to the player to
the same colored connector on the speaker.
Caution
• Do not connect any speakers other than those
supplied to this system.
• Do not connect the supplied speakers to any
amplifier other than the one supplied with this
system. Connection to any other amplifier may
result in malfunction or fire.
• Please connect the speaker cable of subwoofer
(purple) to orange of the player.
• These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
Wall mounting the speaker for
BCS-SB626
The speaker have the mounting holes which
can be used to mount the speaker on the wall.
Before mounting
• Remember that the speaker system is heavy
and that its weight could cause the screws
to work loose, or the wall material to fail to
support it, resulting in the speaker falling.
Make sure that the wall you intend to mount
the speaker on is strong enough to support
them. Do not mount on plywood or soft
surface walls.
• Mounting screws are not supplied. Use
screws suitable for the wall material and
support the weight of the speaker.
Caution
• If you are unsure of the qualities and strength of
the wall, consult a professional for advice.
• Pioneer is not responsible for any accidents or
damage that result from improper installation.
• When mounting the speaker on a wall, install it so
that it is parallel to the floor.
• When mounting the speaker on a wall, do not
attach the accessory speaker stands.
Mounting screw
(not supplied)
4 mm to 5 mm
Connecting 35
En
2