Speaker Setup For Bcs-Fs525 - Pioneer BCS-727 Manual De Instrucciones

Speaker setup for BCS-FS525

Preparing the speakers
For subwoofer:
Use the supplied adhesive to attach four large
pads to the base of subwoofer.
For front speakers:
Assembling the speaker stands and securing
your front speakers.
For vertical installation
1. Use the supplied adhesive to attach 4 small
pads to the speaker stand base.
2. Insert the large pole from the holes behind
the base and secure with the 4 screws.
Large non-skid pads
Small non-skid pads
3. Pass the speaker wire through the hole on
the pole.
4. Secure the speaker and the pole with 2
screws. Ensure that the speaker wire does
not get pinched between the speaker and
the pole.
For horizontal installation
1. Use the supplied adhesive to attach 4 small
pads to the speaker stand base.
2. Insert the small pole from the holes behind
the base and secure with the 4 screws.
Connecting 37
En
Small non-skid pads
2