Fracarro FIL 10 Instrucciones De Funcionamiento página 24

Connettore
DC
alimentazione
input
UHF1 / UHF2 / UHF3:
BIII + DAB:
TV:
USB:
RJ45:
Status LED:
(1):
(2):
(3):
UHF3 *
Input for Terrestrial UHF Antennas. (470÷862 MHz) (FIL 06 is provided with only 2
UHF inputs).
wide band input for B.III and DAB signals (170÷320 MHz).
TV output (170÷320 e 470÷862 MHz)
USB port for pen drive connection (to copy/save the headend unit configuration)
RJ45 port for firmware upgrade
shows that the headend unit is working
ON: normal operation
FLASHING: boot mode or updating
Display (16 digit per 2 lines) and keypad.
Grounding of antenna system (according to EN60728-11).
DC input (power supply connector).
UHF1
UHF2
USB
LED that indicates the activation of the remote
power supply. LED is ON when the remote
power supply is activated.
The power supply can be selected by means
of programming (12V or 24V).
*UHF3 input is not available on FIL 06
24
RJ-45
LED di stato
Status LED