Scope Of Delivery; Instruction Manual; Power Supply; Battery Installation - Bresser MyTime Pro Instrucciones De Uso

please contact your dealer. The dealer will contact the
Service Centre and can send the device in to be repaired,
if necessary.
Protect the device from severe shocks!
Always replace weak or empty batteries with a new, complete
set of batteries at full capacity. Do not use batteries from
different brands or with different capacities. Remove the
batteries from the unit if it has not been used for a long time.
The manufacturer is not liable for voltage damage due
to improperly inserted batteries or through the use of an
improper power adapter!

SCOPE OF DELIVERY

Alarm clock (A), AC/DC adapter with USB power cord (B),

instruction manual

2 AA type batteries are required (not included)
14
(Fig. 1)
PARTS OVERVIEW (Fig. 2-5)
(1) Projector Lens
(2) SNOOZE/Backlight
(3) Focus wheel
(4) FLIP key
(5) + key
(6) - key
(7) MODE key
(8) °C/°F/WAVE key
(9) Alarm key
(10) CONTINUE PROJECTION switch
(11) Battery compartment
(12) USB power socket
(13) USB socket

POWER SUPPLY

Battery installation

1. Remove the cover from the battery compartment.
2. Insert 2 pieces „AA" batteries according to the polarity