Symbol Explanation; Turning On The Device - Bresser MyTime Pro Instrucciones De Uso

indicated in the battery compartment.
3. Close the compartment with the cover.
AC Adapter installation
NOTE!
Please make sure your household voltage match with the
voltage supported by the AC/DC adapter (power input: 110-
240V), or it will damage your clock and adaptor
1. Insert the USB-A plug of the power cord into the USB
socket of the AC/DC adapter.
2. Insert the USB Micro-B plug of the power cord into the
USB power socket of the alarm clock.
3. Plug the power connector into the wall socket.

SYMBOL EXPLANATION

Symbol Description
Radio signal
Date
Symbol Description
Radio signal weakly
Repeat alarm indication
Foreign time indication
PM (12 hr display only)
AM (12 hr display only))
Alarm 1
Alarm 2

TURNING ON THE DEVICE

1. After the batteries are installed, the LCD will turn on. The
clock will automatically search the radio signal**. It takes
about 3-5 minutes to finish this process. During the search
process the signal icon
2. If the radio signal is received, the date & time will be set
automatically with radio control signal icon
NOTE!
Besides, you can force the clock to receive the signal by
pressing WAVE/°C/°F for 3 seconds. It will take 3-5 minutes
to receive the radio signal.
3. If the clock fails to receive the time signal, the radio control
Month
Summer time indication
Degree Celsiuss
Degree Fahrenheit
Dual time
is blinking.
turns on.
DE
GB
FR
IT
ES
15