Bresser MyTime Pro Instrucciones De Uso página 17

NOTE!
1. If no key is pressed for 30 seconds, it will exit the Manual
Time Setting Mode and go back to Time/Temperature
Display and the data updated.
2. During any setting mode, press and hold + or - for approx.
3 seconds for fast setting
3. View week of the day, press - key will toggle between the
day of week and the calendar week.
CALENDAR
1. To change the weekday display from one language to
another language, press and hold the - key for approx. 5
seconds and the display will be scrolled as below: (1) "GE"
for German (2) "FR" for French (3) "IT" for Italian (4) "ES"
for Spanish (5) "EN" for English
2. Releases the - key to confirm setting.
FOREIGN TIME SETTING
1. Press and hold + key for approx. 5 seconds, the icon
will turn on.
2. Press and hold MODE for approx. 5 seconds in Foreign time
/Temperature. The digits for time are blinking and foreign
time can be set as described above by pressing + or - key.
3. Press MODE key again to confirm the setting of foreign time.
4. Press and hold + key for 3 seconds to choose between
local and foreign time display.
ALARM 1 SETTING
In the Alarm 1 Display [AL 1],
1. Press MODE for approx. 5 seconds: the hour digits are
blinking and can be set by pressing + or - key.
2. Press MODE again: the minute digits are blinking and can
be set by pressing + or - key.
3. Press MODE again: the alarm time is set and icon
turn on.
ALARM 2 SETTING
In the Alarm 2 Display [AL 2],
1. Press MODE for approx. 5 seconds: the hour digits are
blinking and can be set by pressing + or - key.
DE
GB
FR
IT
ES
will
17