Removing And Fitting The Battery; Fitting The Battery; Removing The Battery; Switching The Hedge Trimmer On/Off - Stihl HSA 56 Manual De Instrucciones

Ocultar thumbs Ver también para HSA 56:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 61
English

7 Removing and Fitting the Battery

7.1

Fitting the Battery

1
2
► Insert the battery (1) in the battery compartment (2) and
press it home until you hear a click.
Arrows (3) on battery (1) are still visible and battery (1) is
held securely in battery compartment (2). There is no
electrical contact between the hedge trimmer and battery
(1).
► Push the battery (1) into the battery compartment (2) as
far as stop.
The battery (1) engages with a second click and is flush
with the hedge trimmer's housing.
7.2

Removing the Battery

► Stand the hedge trimmer on a level surface.
46
3
2
1
► Press the locking lever (1).
The battery (2) is unlocked and can be removed.

8 Switching the Hedge Trimmer On/Off

8.1

Switching On

WARNING
The motor accelerates and the cutting blades run regardless
of the sequence in which the switch lever and trigger are
depressed. If you depress the trigger first and then the
switch lever, you may lose control of the hedge trimmer. This
can result in serious injuries.
► Depress the switch lever first and then the trigger.
► Depress the switch lever (1) and hold it in that position.
► Push the retaining latch (2) with your thumb to position
► Depress the trigger lockout (3) with your hand and hold it
there.
► Pull the trigger (4) with your index finger and hold it there.
The motor accelerates and the cutting blades run.
8.2

Switching Off

► Release the switch lever, trigger and lockout lever.
► Wait until the cutting blades come to a complete standstill
after about 1 second.
7 Removing and Fitting the Battery
1
2
3
4
0458-714-9821-C
.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido