1. PRESENTATION
THREE-SIDED FRAME
2. INSTALLATION
EQI 70 VS
1-Chimney pipe
2- Hot air grille
3-Cold air grille
4- Forced
convection outlet
STEEL FOUR-SIDED FRAME
IMPORTANT! All local regulations, including those that refer
to national or European regulations, must be applied when
installing this device
NOTE. When installing any type of insulation to
safeguard the heat cover, take the following obligatory
recommendations into account:
1.
Insulation must never touch the frame of the
device. This would prevent heat radiating to the
room
and,
components.
There must be a gap between the frame and
2.
the insulation (this gap will be established
by the manufacturer using galvanised
shields fixed to the cast iron sides.).
(OPTIONAL)
consequently,
damage
its