DSC New Classic PC585 Manual Del Usuario página 24

Ocultar thumbs Ver también para New Classic PC585:
Tabla de contenido

Publicidad

FCC COMPLIANCE STATEMENT
CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority to use this equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be deter-mined by turning the
equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
Re-orient the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for
help.
The user may find the following booklet prepared by the FCC useful:
"How to Identify and Resolve Radio/Television Interference Problems".
This booklet is available from the U.S. Government Printing Office,
Wash-ington D.C. 20402, Stock # 004-000-00345-4.
IMPORTANT INFORMATION
This equipment complies with Part 68 of the FCC Rules. On the side of
this equipment is a label that contains, among other information, the FCC
registration number and ringer equivalence number (REN) for this equip-
ment. If requested, this number must be provided to the Telephone Com-
pany.
FCC Registration Number:
REN:
USOC Jack:
Telephone Connection Requirements
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules
and requirements adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected
to a compatible modular jack that is also compliant. See installation in-
structions for details.
Ringer Equivalence Number (REN)
The REN is used to determine the number of devices that may be connect-
ed to a telephone line. Excessive RENs on a telephone line may result in
the devices not ringing in response to an incoming call. In most but not all
areas, the sum of RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as determined by the
total RENs, contact the local Telephone Company. For products ap-
proved after July 23, 2001, the REN for this product is part of the product
identifier that has the format
US: AAAEQ##TXXXX. The digits represented by ## are the REN with-
out a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the
REN is separately shown on the label.
Incidence of Harm
If this equipment PC585 causes harm to the telephone network, the tele-
phone company will notify you in advance that temporary discontinuance
of service may be required. But if advance notice is not practical, the Tel-
ephone Company will notify the customer as soon as possible. Also, you
Las marcas comerciales, logotipos y marcas de servicio que aparecen en este documento están registradas en los Estados
Unidos (u otros países). Cualquier mal uso de las marcas está estrictamente prohibido y Tyco International Ltd. hará
cumplir agresivamente sus derechos de propiedad intelectual con el mayor peso de la ley, incluida la prosecución de
causa penal cuando sea necesario. Todas las marcas comerciales que no son propiedad de Tyco International Ltd. son
propiedad de sus respectivos dueños y se utilizan con permiso o son permitidas bajo las leyes aplicables.
Los productos y sus especificaciones están sujetos a cambio sin previo aviso. El producto real puede variar a la imagen
mostrada. No todos los productos incluyen todas las prestaciones. La disponibilidad varía según el país; póngase en con-
tacto con su distribuidor.
F53CAN-32394-AL-E
0.0B
RJ-31X
© 2011 Tyco International Ltd. y sus respectivas compañías.
Todos los derechos reservados
Toronto, Canadá • www.dsc.com
Impreso en Canadá
will be advised of your right to file a complaint with the FCC if you be-
lieve it is necessary.
Changes in Telephone Company Equipment or Facilities The Telephone
Company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this hap-
pens the Telephone Company will provide advance notice in order for
you to make necessary modifications to maintain uninterrupted service.
Equipment Maintenance Facility
If trouble is experienced with this equipment PC585, for repair or warran-
ty information, please contact the facility indicated below. If the equip-
ment is causing harm to the telephone network, the Telephone Company
may request that you disconnect the equipment until the problem is
solved. This equipment is of a type that is not intended to be repaired by
the end user.
DSC c/o APL Logistics 757 Douglas Hill Rd, Lithia Springs, GA 30122
Additional Information
Connection to party line service is subject to state tariffs. Contact the state
public utility commission, public service commission or corporation
commission for information.
Alarm dialing equipment must be able to seize the telephone line and
place a call in an emergency situation. It must be able to do this even if
other equipment (telephone, answering system, computer modem, etc.)
already has the telephone line in use. To do so, alarm dialing equipment
must be connected to a properly installed RJ-31X jack that is electrically
in series with and ahead of all other equipment attached to the same tele-
phone line. Proper installation is depicted in the figure below. If you have
any questions concerning these instructions, you should consult your tel-
ephone company or a qualified installer about installing the RJ-31X jack
and alarm dialing equipment for you.
Customer Premises Equipment and Wiring
Network
Service
Provider's
RJ-31X
Facilities
Jack
Alarm Dialing
Equipment
Telephone
Line
Network
Demarcation
Telephone
Point
Answering
System
Computer
Unused
RJ-11 Jack
Telephone
Unused
Fax Machine
RJ-11 Jack
Telephone

Publicidad

Tabla de contenido
loading

Tabla de contenido