Bowers & Wilkins Zeppelin Mini Manual De Instrucciones página 3

1. Zeppelin Mini Carton Contents.
Zeppelin Mini
• Zeppelin Mini
• iPod and iPhone cradles
• Remote Control Handset
• Power Supply
• Power Cable
• Document pack containing a Quick Start Guide,
warranty information and statutory safety warnings.
Note: A USB cable is required if you wish to connect
your Zeppelin Mini to a PC/Mac. For reliable
operation the cable should not exceed 3m (10 ft) in
length. The Zeppelin Mini should also be connected
directly to the PC/Mac USB port and not via any
intermediate USB hardware.
Environmental Information
All Bowers & Wilkins products are
designed to comply with international
directives on the Restriction of Hazardous
Substances (RoHS) in electrical and electronic
equipment and the disposal of Waste Electrical
and Electronic Equipment (WEEE). These symbols
indicate compliance and that the products must be
appropriately recycled or processed in accordance
with these directives. Consult your local waste disposal
authority for guidance.
2. Connecting To Your Zeppelin Mini
4
1
1
1
Zeppelin Mini connection sockets are found on a panel
located on the back of the unit. The diagram above
illustrates the Zeppelin Mini connection panel.
Power Supply
Connect the Zeppelin Mini Power Supply to a mains
outlet socket using the supplied mains cable. Now
connect the Power Supply output cable to the Zeppelin
Mini power input socket. When first connected to
mains power the Zeppelin Mini will automatically enter
standby mode with its indicator illuminating red.
Note: Section 4 describes all the Zeppelin Mini
indicator colours and their meanings.
USB Input
If you wish to listen to audio either stored or streamed
on your PC/Mac using the Zeppelin Mini USB input,
connect it using a USB cable from a spare PC/Mac
USB socket. The Zeppelin Mini USB input also enables
data held on your PC/Mac to be synchronised with the
data held on your iPod or iPhone. See the Section 5 for
more information.
Aux Input
If you wish to listen to an external analogue audio
source, TV audio or your PC/Mac analogue audio
output for example, connect it to the Zeppelin Mini
aux in socket using a cable terminated with a 3.5mm
mini-jack plug.
iPod and iPhone Model Compatibility and
Docking
Zeppelin Mini is compatible with the iPod and iPhone
models illustrated below.
With the majority of iPod models, docking to the
Zeppelin Mini is achieved simply by engaging the iPod
with the dock connector as illustrated above.
3