Fitting And Adjusting The Connecting Cable; Fitting And Removing Harness; Fitting And Adjusting The Carrying System - Stihl AR 2000 L Manual De Instrucciones

Ocultar thumbs Ver también para AR 2000 L:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
9 Adjusting Battery for User
1
► Depress the locking tab (1) and push it in direction of
arrow.
► Remove the slide (2).
2
4
► Line up mark (3) with mark (4).
► Fit the slide (2).
► Pull the slide (2) up (in opposite direction to arrow).
The slide (2) engages with a click.
► Set slide (2) to same position on left and right shoulder
straps.
9.2

Fitting and Adjusting the Connecting Cable

The connecting cable can be fitted and adjusted to suit the
user's height, different cordless products and the
application.
0458-820-9921-A
2
2
3
1
2
2
2
The connecting cable can be secured in position by the
guide (1) on the harness and the fasteners (2), or on the side
of the backplate with the fasteners (2).
2
3
The length of the connecting cable can be adjusted by
making a loop on the battery (3) or at one side (4).
► Fit the connecting cable so that has no kinks and is as
short as possible without hindering your work.
9.3

Fitting and Removing Harness

9.3.1

Fitting and Adjusting the Carrying System

► Put the battery on your back.
English
2
2
4
37

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ar 3000 l

Tabla de contenido