Belkin Wireless G Plus Manual Del Usuario página 105

Troubleshooting
Problem:
I am having difficulty setting up Wi-Fi Protected Access (WPA)
security on a Belkin client card (Wireless Network Card or Adapter)
for a home network.
Solution:
Clients must use the same key that the Wireless G Plus Router
uses. For instance, if the key is "Smith Family Network Key" in the
Wireless G Plus Router, the clients must also use that same key.
1.
Double-click the "Signal Indicator" icon to bring up the "Wireless
Network Utility" screen. The "Advanced" button will allow you to
view and configure more options of your client card.
2.
Once the "Advanced" button is clicked, the Belkin Wireless LAN
Utility will appear. This Utility will allow you to manage all the
advanced features of the Belkin client card.
3.
Under the "Wireless Network Properties" tab, select a
network name from the "Available Networks" list and click the
"Properties" button.
4.
Under "Network Authentication", select "WPA-PSK (no server)".
5.
Type your WPA key in the "Network key" box.
Important
: WPA-PSK is a combination of numbers and letters
from A-Z and 0-9. For WPA-PSK, you can enter eight to 63
characters. This network key needs to match the key you assign
to your Wireless G Plus Router.
6.
Click "OK", then "Apply" to save the settings.
103 103
1
2
3
4
5
6
7
8
9
10