Belkin Wireless G Plus Manual Del Usuario página 56

Using the Web-Based Advanced User Interface Using the Web-Based Advanced User Interface
128-Bit WEP Encryption
Note to Mac users:
AirPort. To configure encryption for your Mac computer, set the
encryption using the manual method described in the next section.
1.
Select "128-bit WEP" from the drop-down menu.
2.
After selecting your WEP encryption mode, you can enter your
key manually by typing in the hex key, or you can type in a
passphrase in the "Passphrase" field and click "Generate" to
create a key.
A hex (hexadecimal) key is a combination of numbers and letters
from A–F and 0–9. For 128-bit WEP, you need to enter 26 hex
keys.
For instance: C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key
3.
Click "Apply Changes" to finish. Encryption in the Router is now
set. Each of your computers on your wireless network will now
need to be configured with the same security settings.
WARNING:
If you are configuring the Wireless G Plus Router from a
computer with a wireless client, you will need to ensure that security
is turned ON for this wireless client. If this is not done, your client will
lose its wireless connection.
The Passphrase option will not operate with Apple
54 54