Belkin Wireless G Plus Manual Del Usuario página 58

Using the Web-Based Advanced User Interface Using the Web-Based Advanced User Interface
Setting WPA-PSK (no server)
1.
From the "Security Mode" drop-down menu, select "WPA-PSK
(no server)".
2.
For "Encryption Technique", select "TKIP" or "AES". This setting
will have to be identical on the clients that you set up.
3.
Enter your pre-shared key. This can be from eight to 63
characters and can be letters, numbers, or symbols. This
same key must be used on all of the clients that you set up.
For example, your PSK might be something like: "Smith family
network key".
4.
Click "Apply Changes" to finish. You must now set all clients to
match these settings.
56 56