Belkin Wireless G Plus Manual Del Usuario página 82

Using the Web-Based Advanced User Interface Using the Web-Based Advanced User Interface
Changing System Settings
The "System Settings" page is where you can enter a new
administrator password, set the time zone, enable remote
management, and turn on and off the NAT function of the Router.
Setting or Changing the Administrator Password
The Router ships with NO password entered. If you wish to add a
password for greater security, you can set a password here. Write
down your password and keep it in a safe place, as you will need it if
you need to log into the Router in the future. It is also recommended
that you set a password if you plan to use the remote management
feature of your Router.
Changing the Login Time-Out Setting
The login time-out option allows you to set the period of time that you
can be logged into the Router's Web-Based Advanced User Interface.
The timer starts when there has been no activity. For example, you
have made some changes in the advanced setup interface, then left
your computer alone without clicking "Logout". Assuming the
time-out is set to 10 minutes, then 10 minutes after you leave, the
login session will expire. You will have to log into the Router again
to make any more changes. The login time-out option is for security
purposes and the default is set to 10 minutes.
Note:
Only one computer can be logged into the Router's Web-Based
Advanced User Interface at one time.
80 80