Adjustments - Stihl FG 2 Instrucciones De Servicio

Ocultar thumbs Ver también para FG 2:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
A
B
Turn the chain rest to suit the position of
the master cutter:
:
Set the chain rest as shown in
illustration A if the master cutter is in
the left-hand row.
:
Set the chain rest as shown in
illustration B if the master cutter is in
the right-hand row.
The sharpening procedure described
below assumes the master cutter is in
the left-hand row.
The procedure is the same if the master
cutter is in the right-hand row. Move the
chain rest to the position shown in
illustration B, reset the file, adjust angle.
18

Adjustments

Adjusting Filing Angle
:
Check filing angle in the following
table.
Chain Type
Filing Angle
Rapid Standard (RC)
30 °
Rapid Micro (RM)
30 °
Rapid Super (RS)
30 °
Picco Micro (PM/PMN)
30 °
RCX, RMX, PMX
10 °
(ripping chain)
1
:
Swing the filing frame upwards.
:
Loosen the nut (1).
:
To rotate guide, lift it clear of the
teeth.
FG 2

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido