Reg On/Off; Area; Display Information; Set The Time - Blaupunkt MADRID 170 BT Manual De Uso

OPERATION
12(24) HOUR format in EUR(USA or LAT) region.
You have to setting the clock format
again.

AREA:

In the AREA item of the menu. There are
EUR/USA/LAT for your selecting.
TA volume: This function allows you to
define the minimum volume for the
traffic announcements. The adjustable
range is 10~43. The defaulted value is 21.
Rotate the volume knob to adjust the
volume of the traffic.

REG on/off

When AF function is on. In SEL menu you
can switch on or off region mode in REG
item. Some broadcasting stations
change their program from normal
broadcasting to regional broadcasting
for a certain time period. When region is
on, the current listening program
remains unchanged.

DISPLAY INFORMATION

Press DISP button (9) to show the time and
some infomations as below for 5 seconds:
CT->PS->PTY->FREQ.
Then it returns to show the information.
Notes:
 CT = Clock Time
 FREQ = Frequency.
 PS: Program Service.
In MP3/WMA mode. press DISP button to
show the ID3 tag or playing time.

SET THE TIME

(1) Manual setting:
Press and hold DISP button for 2 seconds.
The hour of the time will be flashing. Press
/ button to set the correct hour.
Press DISP button shortly to change to
minute. Also use
the correct minute. After that press DISP
button to confirm.
(2) Synchronize the time from the RDS
station:
To receive a RDS station which has good
signal(The AF symbol of the LCD does not
flashing). Several minutes later the time will
be synchronized to the correct time by the
station's signal. (Note: None RDS station
does not have this function.)

LIQUID CRYSTAL DISPLAY

Exhibit current frequency and activated
functions on the display.

AUXILIARY INPUT

The unit can be connected to a portable
audio player through the AUX IN jack (11).
Pressing SRC button to switch to AUX
mode when inserted an audio source to the
unit.

RESET FUNCTION

RESET button (21) must be activated with
either a ballpoint pen or thin metal object.
The RESET button is to be activated for the
following reasons:
49. Initial installation of the unit when all
wiring is completed.
50. All the function buttons do not operate.
51. Error symbol on the display.
Note: if press RESET button (21), the unit
can't work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
186
/ button to set