Turn On/Off The Unit; Mute; Faceplate Release; Sound Adjustment - Blaupunkt MILANO 170 BT Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
OPERATION

TURN ON/OFF THE UNIT

Turn on the unit by pressing
When system is on. Press and hold
button (4) for 2 seconds to turn off the unit.

MUTE

Shortly press MUTE button(1) to muting
the audio output. Press it again to recover
output.

FACEPLATE RELEASE

Press release button
removable faceplate.

SOUND ADJUSTMENT

Press MENU button (6) shortly to select the
desired adjustment mode. The adjustment
mode will change in the following order:
-BAS-TRE-BAL-FAD- VOL-
BAS: bass
TRE: treble
BAL: balance
FAD: fader
VOL: volume
By rotating the audio knob (6) it is possible
to adjust the desired sound quality.
Press and hold MENU button (6) for 2
seconds into the system menu as below:
AF– TA – REG – TAVOL – LOC – STEREO –
BEEP – XBASS-AREA
AF:
Alternative Frequencies
TA:
Traffic Announcement
REG: region
TAVOL:TA volume
LOC: local
STEREO
AREA: Europe

REG on/off

When AF function is on. In REG item of
the system menu you can switch it on or
off. Some broadcasting stations change
their program from normal broadcasting
to regional broadcasting for a certain
time period. When region is on, the
button(4).
(5) to detach the
5
current listening program remains
unchanged.

TA volume

This function allows you to define the
minimum
volume
announcements. The adjustable range is
20~43. The defaulted value is 25. Rotate
the volume knob to adjust the volume of
the traffic.

LOC on/off

In this item rotating the audio knob (6) to
turn on/off local function. In LOC ON mode the
unit will reduce the receiving sensitivity
when you search station. That means you
can receive the station that sound is good.
It will ignores the station that sound is not
good. In LOC OFF mode it will increase the
receiving sensitivity when you search the
station. That means you can receive more
stations.

STEREO/MONO

In this item rotating the audio knob (6) to
choose STEREO or MONO mode. In STEREO
mode you can receive FM stereo signal. In
MONO mode the stereo station will be
switched to monochrome. Sometimes when
the signal is not good. If you change it to
MONO mode. The noise will be reduced.

BEEP on/off

The car audio device is equipped with 2
beep tone modes. Rotate the volume
knob to choose one.
- Beep on mode: The confirmation beep
sound is heard whenever a button is
pressed.
- Beep off mode: The confirmation beep is
switched off whenever a key is pressed

AREA

In this item, rotate the volume to select
Europe/USA/LAT area.
for
the
traffic
E
N
L
I
S
H

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Augsburg 170 btAlicante 170Essen 170

Tabla de contenido