Maintenance; Warranty - SPARKY professional MBS 776 Instrucciones De Uso

12. Wear safety goggles, a dust mask and earmuffs.
DUST EXTRACTION
1. Disconnect the plug from the power supply.
2. Firmly push the plastic nozzle of the dust bag (3) onto
the dust extraction port (10). (Fig. 8)
3. Before removing the dust bag, first disconnect the
plug from the power supply.
WARNING: For optimum dust removal, empty
the dust bag when it is no more than half full. Do not
use the dust bag when sanding metal. The hot metal
particles could cause residual wood dust or the bag
itself to catch fire.
Cleaning the bag: Dismount and empty the dust bag,
tapping it gently to remove dust. On occasion, slip the
bag off of the frame and turn bag inside out. Brush dust
off of the lining using a soft brush.
4. A vacuum cleaner adapter can be used to connect a
household vacuum cleaner or workshop dust extrac-
tion system to the sander.
5. An adapter is fitted into the dust extraction port (10).
ACCESSORIES
Dust bag, dust adapter, 80 grit sanding belt fitted on the
machine.

Maintenance

WARNING: Always ensure that the tool is
switched off and unplugged before attempting to per-
form inspection or maintenance. Regularly check that
all the fixing screws are tight. They may vibrate loose
over time.
Re-lubricate all moving parts at regular intervals.
BRUSH REPLACEMENT
When the carbon brushes are worn out, both brushes
must be replaced simultaneously with genuine brushes
at SPARKY service centre for warranty and post-war-
ranty service.
CLEANING
For safe operation always keep the machine and
its ventilation slots clean. Regularly check to see if any
dust or foreign matter has entered the grills near the mo-
tor and around the switches. Use a soft brush to remove
any accumulated dust. Wear safety glasses to protect
your eyes whilst cleaning.
If the body of the tool needs cleaning, wipe it with a soft
damp cloth. A mild detergent can be used.
Original instructions
WARNING: Never use alcohol, petrol or other
cleaning agent. Never use caustic agents
to clean plastic parts.
WARNING: Water must never come into con-
tact with the tool.
IMPORTANT: To assure product safety and reliability,
repairs, maintenance and adjustment (including brush
inspection and replacement) should be performed by
certified service centres or other qualified service or-
ganisations, always using genuine replacement parts.

Warranty

The guarantee period for SPARKY power tools is deter-
mined in the guarantee card.
Faults due to normal wear, overloading or improper han-
dling will be excluded from the guarantee. Faults due to
defective materials implemented as well as defects in
workmanship will be corrected free of charge through
replacement or repair.
The complaints for defective SPARKY power tools will
be recognized if the machine is sent back to the dealer
or is presented to the authorised warranty service centre
undismantled, in its initial condition.
Notes
Carefully read the entire original instructions before us-
ing this product.
The manufacturer reserves the right to make changes
and improvements to the products and to alter specifica-
tions without prior notice.
Specifications may differ from country to country.
7
EN